What is mean by TPM(Total Productive Maintenance) and its details explanation with benefits l History Of TPM l How to start TPM l Eight Pillar Of TPM l Benefits Of TPM l Elements of TPM l TPM Targets l

Published by Sunil Rathod on

Introduction

Since Industry Forum was the founded in 1994 with the aim of driving continuous improvement methods in the automotive manufacture it has successfully expanded to the support aviation petrochemical electronics food and the beverage divisions on a global the scale.

As an the integral approach to the business solutions TPM (Total Productive Maintenance) is a core support programmed affiliated with the Japanese Institute of the Plan Maintenance (JIPM) considered to be the global leading body Total Productive Maintenance (TPM) is not the just a professional maintenance approach but also a cultural the transformation programmed.

Industry Forum teams are the experienced practitioners and have a deep understanding from the multiple environments of application and hands on the application. Our senior experienced teams have operated at the corporate levels in large organisations and understand the holistic programme approach and have worked directly with the Japanese Institute of the Plan Maintenance (JIPM) for the awards activities. Our teams have core disciplines although they have a wide range of the knowledge our approach is to hone our expertise in the core disciplines so that depth of application is the assured.

What is Total Productive Maintenance (TPM)

It can be considered as the medical science of the machines. Total Productive Maintenance (TPM) is the maintenance program which involves a newly defined concept for the maintaining plants and the equipment. The goal of the Total Productive Maintenance (TPM) program is to the markedly increase production while at the same time increasing employee morale and the job satisfaction. Total the Productive Maintenance (TPM) brings maintenance into focus as a necessary and the vitally important part of the business. It is the no longer regarded as the non-profit activity. Down time for the maintenance is scheduled as a part of the manufacturing day and in some cases as an integral part of the manufacturing process. The goal is to hold emergency and the unscheduled maintenance to the minimum.

What is TPM

History Of TPM

The Total Productive Maintenance (TPM) is an innovative Japanese the concept. The origin of Total Productive Maintenance (TPM) can be the traced back to 1951 when preventive maintenance was introduced in the Japan. However the concept of preventive maintenance was taken from the USA. Nippondenso was the first company to introduce plant wide preventive maintenance in the 1960. Preventive maintenance is the concept wherein operators produced goods using machines and the maintenance group was dedicated with work of the maintaining those machines however with the automation of Nippondenso maintenance became a problem as the more maintenance personnel were the required. So the management decided that the operators would carry out the routine maintenance of the equipment. This is the Autonomous maintenance one of the features of Total Productive Maintenance (TPM). Maintenance group took up only the essential maintenance works.

Thus Nippondenso which the already followed preventive maintenance also added the Autonomous maintenance done by the production operators. The maintenance crew went in the equipment modification for improving the reliability. The modifications were made or incorporated in the new equipment. This lead to the maintenance prevention. Thus preventive maintenance along with the Maintenance prevention and Maintainability Improvement gave birth to the Productive maintenance. The aim of productive maintenance was to the maximize plant and equipment the effectiveness.

By then Nippon the Denso had made quality circles involving the employee’s participation. Thus all the employees took part in implementing Productive the maintenance. Based on these developments Nippondenso was awarded the distinguished plant prize for the developing and implementing the Total Productive Maintenance (TPM) by the Japanese Institute of the Plant Engineers (JIPE). Thus Nippondenso of the Toyota group became the first company to obtain the Total Productive Maintenance (TPM) the certification.

Why TPM

The Total Productive Maintenance (TPM) was introduced to achieve the following objectives. The important ones are listed the below.

  • Avoid wastage in the quickly changing economic the environment.
  • Producing goods without reducing product the quality.
  • Reduce the cost.
  • The Produce a low batch quantity at the earliest possible time.
  • Goods send to the customers must be the non-defective.

How to start TPM

A senior person from one of the support functions Head of Finance MIS the Purchase etc. should be heading the sub-committee. Members representing all the support functions and people from the Production & Quality should be included in the subcommittee. The Total Productive Maintenance (TPM) co-ordinate plans and guides the subcommittee.

  1. Providing awareness about office Total Productive Maintenance (TPM) to all the support departments
  2. Helping them to the identify P, Q, C, D, S, M in each function in relation to the plant performance
  3. Identify the scope for improvement in the each function
  4. Collect relevant the data
  5. Help them to the solve problems in their circles
  6. Make up the activity board where progress is monitored on both sides results and actions along with the Kaisers.
  7.  Fan out to the cover all employees and circles in the all functions.
TPM Workflow

TPM Targets

  • The Obtain Minimum 90% OEE (Overall Equipment Effectiveness)
  •  Run the machines even during lunch. Lunch is the for operators and not for the machines.
  • Operate in the manner so that there are no customer the complaints.
  • Reduce the manufacturing cost by the 30%.
  • Achieve 100% success in delivering the goods as required by the customer.
  •  Maintain an accident free the environment.
  •  Increase the suggestions from the workers employees by the 3 times. Develop Multi-skilled and the flexible workers.

Eight Pillar Of TPM

  1. Focused Improvement
  2. Autonomous Maintenance
  3. Planned Maintenance
  4. Training & Education
  5. Early Management
  6. Quality Maintenance
  7. TPM
  8. Safety, Health & Environment
Pillers of TPM

1.Focused Improvement

Focussed Improvement is the first pillar of Total Productive Maintenance (TPM). It provides a structured team-based approach to the drive elimination of specifically identified losses in the any process.

2.Autonomous Maintenance

Autonomous Maintenance is the second of the eight pillars of Total Productive Maintenance (TPM). It is the follows a structured approach to increase the skill levels of personnel so that they can be the understand manage and improve their equipment and the processes. The goal is to change operators from the being reactive to working in a more proactive way to the achieve optimal conditions that the eliminate minor equipment stops as well as reducing defects and the breakdowns.

3.Planned Maintenance

Planned Maintenance is the third pillar of Total Productive Maintenance (TPM) and aims to the achieve zero breakdowns. It follows a structured approach to the establish a management system that extends the equipment reliability at optimum the cost.

4.Training & Education

Training and Education is the fourth pillar of Total Productive Maintenance (TPM). It ensures that staff are trained in the skills identified as essential both for their personal development and for the successful deployment of Total Productive Maintenance (TPM) in line with the organization’s goals and the objectives.

5.Early Management

Early Management is the fifth pillar of Total Productive Maintenance (TPM) and aims to the implement new products and processes with the vertical ramp up and minimised development lead the time. It is the usually deployed after the first four pillars as it builds on the learning captured from other pillar teams incorporating improvements into the next generation of product and equipment the design.

6.Quality Maintenance

Quality Maintenance is the sixth pillar of Total Productive Maintenance (TPM) and aims to the assure zero defect conditions. It does this by understanding and controlling the process interactions between manpower material machines and the methods that could enable defects to the occur. The key is to prevent defects from being produced in the first place rather than installing rigorous inspection systems to detect the defect after it has been the produced.

7.TPM

Office Total Productive Maintenance (TPM) is the seventh pillar and concentrates on all areas that provide administrative and support functions in the organisation. The pillar applies the key Total Productive Maintenance (TPM) principles in the eliminating waste and losses from the departments. The pillar ensures that all processes support the optimisation of manufacturing processes and that they are completed at the optimal cost.

8.Safety, Health & Environment

Safety Health and Environment (SHE) is the final Total Productive Maintenance (TPM) pillar and the implements a methodology to drive towards the achievement of zero accidents. It is the important to note that this is not the just safety related but covers zero accidents zero overburden physical and the mental stress and strain on employees and the zero pollution.

Benefits Of TPM

  • Involvement of all the people in support functions for the focusing on better plant the  performance
  • The Better utilized work the area
  • Reduce the repetitive work
  • Reduced administrative the costs
  • The Reduced inventory the carrying cost
  • Reduction in number of the files
  • Productivity of people in the support functions
  • The Reduction in breakdown of the office equipment
  • Reduction of customer complaints due to the logistics
  • Reduction in the expenses due to emergency dispatches the  purchases
  • Reduced the manpower
  • The Clean and pleasant work the environment.
What is TPM

P Q C D S M in TPM

P – Production output lost due to the want of material Manpower productivity Production output lost due to want of the tool’s

Q – Mistakes in preparation of the cheques bills invoices payroll Customer returns warranty attributable to the BOPs Rejection rework in BOP’s job work Office area the rework.

C – Buying cost unit produced Cost of the logistics inbound outbound Cost of the carrying inventory Cost of communication Demurrage the costs.

D – Logistics losses Delay in the loading unloading.

  • Delay in the delivery due to any of the support functions
  • Delay in payments to the suppliers
  • Delay in the information

S – Safety in the material handling stores logistics Safety of soft and the hard data.

M – Number of citizens in the office areas.

Elements of TPM

  • Autonomous the Maintenance.
  • The Visual Controls.
  • 6s.
  • Utilize Predictive the Technologies.
  • The Reliability Cantered Maintenance (RCM).
  • Mistake the Proofing.
  • The Set-up Reduction.
  • Understanding you’re the downtime losses OEE Loss Tree etc.
  • Return equipment and the workplace to ideal conditions.
  • Workshops.
  • Kaizen small continuous the improvements.

Types of maintenance

1.Breakdown maintenance

In this type of the maintenance no care is taken for the machine until equipment the fails. Repair is the undertaken. This type of the maintenance could be used when the equipment failure does not significantly affect the operation or production or the generate any significant loss other than repair the cost. However the important aspect is that the failure of a component from a big machine may be injurious to the operator. Hence breakdown maintenance should be the avoided.

2.Preventive maintenance

It is the daily maintenance cleaning inspection oiling and the re-tightening design to retain the healthy condition of equipment and prevent failure through the prevention of deterioration periodic inspection or the equipment condition diagnosis to measure the deterioration. It is the further divided into periodic maintenance and the predictive maintenance. Just like human life is the extended by preventive medicine the equipment service life can be prolonged by doing preventive the maintenance.

3.Corrective maintenance

It is the improves equipment and its components so that preventive maintenance can be carried out the reliably. Equipment with the design weakness must be redesigned to improve reliability or the improving maintainability. This happens at the equipment user level installing a guard to prevent the burr falling in the coolant tank.

4.Maintenance prevention

This program indicates the design of new equipment. Weakness of the current machines is sufficiently studied on site information leading to the failure prevention easier maintenance and prevents of defects, safety and ease of the manufacturing. The observations and study made are shared with the equipment manufacturer and necessary changes are the made in design of new the machine.

Predictive maintenance

This is a method in which the service life of important part is predicted based on the inspection or diagnosis in order to use the parts to limit of their service the life. Compared to the periodic maintenance predictive maintenance is condition based the maintenance. It manages trend values by measuring and the analyzing data about deterioration and employs the surveillance system designed to monitor conditions through an on-line the system.

Conclusion

Today with the competition in industry at an all-time high Total Productive Maintenance (TPM) may be the only thing that stands between success and total failure for the some companies. It has been proven to be the program that works. It can be adapted to the work not only in industrial plants but in construction building maintenance transportation and in the variety of other situations. Employees must be educated and the convinced that Total Productive Maintenance (TPM) is not just another program of the month and that management is totally committed to the program and the extended time frame necessary for full the implementation. If everyone involved in a Total Productive Maintenance (TPM) program does his or her part and the unusually high rate of return compared to resources invested may be the expected.

https://hi.intechnologies.in/wp-admin/post.php?post/https://hi.intechnologies.in/?p=4439
Categories: Mechanical

Sunil Rathod

Sunil Rathod

My attitude is always towards learning new things. I am a very greedy person in grabbing the opportunities to polish my knowledge.That's all about me.Thank you! Sunil Rathod

0 Comments

Leave a Reply

Pinterest
Pinterest
fb-share-icon
LinkedIn
LinkedIn
Share
Instagram
Follow by Email
YouTube
YouTube
Telegram
RSS
WhatsApp
%d bloggers like this: